Technique description and performance:
TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function.
- Main technical parameters:
Max drilling depth
|
Mud drilling: 150m, air drilling: 80m
|
Drilling method
|
Mud drilling, air drilling
|
Drilling tools
|
Drill bits (dia)
|
Ф114mm
|
Drilling pipe (DiaXLength)
|
Ф60×4500mm
|
Power swivel
|
Output torque
|
3400N.m
|
Output rev. scope
|
0-160 r/min
|
Pull-up & pull-down system
|
Max pull-up force
|
32kN
|
Feed rate
|
0~0.4m/s
|
Max Pull-up rate
|
1.7m/s
|
Hydraulic system
|
Oil pump rev.
|
1600r/min
|
Working pressure
|
Rotating
|
17MPa
|
Pull-down
|
12MPa
|
Mud pump
|
Pressure
|
3MPa
|
Flow rate
|
300L/min
|
Screw air compressor
|
Pressure
|
1.2 MPa
|
Displacement
|
12.5 m3/min
|
Truck information:
- WTC5225TSM 6*6 desert off-road truck chassis
- Color: cab is yellow, Frame and bridge are black
- Drive type: 6*6
- Performance parameter:
Max. speed: 70km/h
Max. speed in desert: 20km/h
Min. turning diameter: ≤22m
Max. clamping slope: 50%
Max. clamping slope in desert: 30%
Brake distance: ≤9m (speed: 30km/h)
Angle of approach/angle of away : 35°/30°
Min. Ground clearance of machine: 400mm
- Quantity:
Unladen weight: 10945kg
Total weight: 22000kg
Size:
Chassis (l×w×h):8960mm×2500mm×3420 mm
Wheelbase:4000 mm+1350 mm
Tread:front-wheel drive: 2100 mm Middle and rear wheel: 2100 mm
- Engine:
Brand: DEUTZ
Model:BF6M1013-30E4
Type: Six-cylinder in-line direct injection diesel engine with exhaust gas turbocharger and intercooler, water cooled.
Net power: 220kw/2300rpm
Max.: Torque: 1100Nm/1400rpm
Min. fuel specific consumption: 201g/kw.h
Idle speed:850rpm
Effluent standard: state 4
~If you are also interested in other drilling rigs see http://www.drillingrigts.com/
3123981177@163.com