Technique description and performance:
TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function.
Max drilling depth |
Mud drilling: 150m, air drilling: 80m |
||
Drilling method |
Mud drilling, air drilling |
||
Drilling tools |
Drill bits (dia) |
Ф114mm |
|
Drilling pipe (DiaXLength) |
Ф60×4500mm |
||
Power swivel |
Output torque |
3400N.m |
|
Output rev. scope |
0-160 r/min |
||
Pull-up & pull-down system |
Max pull-up force |
32kN |
|
Feed rate |
0~0.4m/s |
||
Max Pull-up rate |
1.7m/s |
||
Hydraulic system |
Oil pump rev. |
1600r/min |
|
Working pressure |
Rotating |
17MPa |
|
Pull-down |
12MPa |
||
Mud pump |
Pressure |
3MPa |
|
Flow rate |
300L/min |
||
Screw air compressor |
Pressure |
1.2 MPa |
|
Displacement |
12.5 m3/min |
Truck information:
Max. speed: 70km/h
Max. speed in desert: 20km/h
Min. turning diameter: ≤22m
Max. clamping slope: 50%
Max. clamping slope in desert: 30%
Brake distance: ≤9m (speed: 30km/h)
Angle of approach/angle of away : 35°/30°
Min. Ground clearance of machine: 400mm
Unladen weight: 10945kg
Total weight: 22000kg
Size:
Chassis (l×w×h):8960mm×2500mm×3420 mm
Wheelbase:4000 mm+1350 mm
Tread:front-wheel drive: 2100 mm Middle and rear wheel: 2100 mm
Brand: DEUTZ
Model:BF6M1013-30E4
Type: Six-cylinder in-line direct injection diesel engine with exhaust gas turbocharger and intercooler, water cooled.
Net power: 220kw/2300rpm
Max.: Torque: 1100Nm/1400rpm
Min. fuel specific consumption: 201g/kw.h
Idle speed:850rpm
Effluent standard: state 4
~If you are also interested in other drilling rigs see http://www.drillingrigts.com/
3123981177@163.com
Payment Terms︰ T/T OR L/C