~Technique description and performance:
TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function.
1.Main technical parameters:
Max drilling depth
Mud drilling: 150m, air drilling: 80m
Drilling method
Mud drilling, air drilling
Drilling tools
Drill bits (dia)
Ф114mm
Drilling pipe (DiaXLength)
Ф60×4500mm
Power swivel
Output torque
3400N.m
Output rev. scope
0-160 r/min
Pull-up & pull-down system
Max pull-up force
32kN
Feed rate
0～0.4m/s
Max Pull-up rate
1.7m/s
Hydraulic system
Oil pump rev.
1600r/min
Working pressure
Rotating
17MPa
Pull-down
12MPa
Mud pump
Pressure
3MPa
Flow rate
300L/min
Screw air compressor
Pressure
1.2 MPa
Displacement
12.5 m3/min
Truck information:
1.WTC5225TSM 6*6 desert off-road truck chassis
2.Color: cab is yellow, Frame and bridge are black
3.Drive type: 6*6
4.Performance parameter:
Max. speed: 70km/h
Max. speed in desert: 20km/h
Min. turning diameter: ≤22m
Max. clamping slope: 50%
Max. clamping slope in desert: 30%
Brake distance: ≤9m (speed: 30km/h)
Angle of approach/angle of away : 35°/30°
Min. Ground clearance of machine: 400mm
1.Quantity:
Unladen weight: 10945kg
Total weight: 22000kg
Size:
Chassis (l×w×h)：8960mm×2500mm×3420 mm
Wheelbase：4000 mm＋1350 mm
Tread：front-wheel drive: 2100 mm Middle and rear wheel: 2100 mm
1.Engine:
Brand: DEUTZ
Model：BF6M1013-30E4
Type: Six-cylinder in-line direct injection diesel engine with exhaust gas turbocharger and intercooler, water cooled.
Net power: 220kw/2300rpm
Max.: Torque: 1100Nm/1400rpm
Min. fuel specific consumption: 201g/kw.h
Idle speed：850rpm
Effluent standard: state 4
~If you are also interested in other drilling rigs see http://www.drillingrigts.com/
3123981177@163.com
